Carrier Packers

Thirty different sizes to pick from. The ten small  packers for the lateral lines have an aluminum ball at each end. The twenty packers for mainline repairs have flow through for by-pass and are equipped with wheel sets for ease of passage.

Air Push Rods

Use these in pre-measured lines for increased production. These rods are five feet long and are equipped with locking quick-connect air fittings. They are flexible enough to be easily inserted through the manhole into the line, yet stiff to push the packer even for lengths of 100 feet of more.

Composites

We have fiberglass matting   for use in sectional point repairs. The fiberglass is a 0/90 degree woven material with a thin polyester veil on one side to provide a resin-rich and attractive inner pipe surface. Each roll is approximately 50 inch wide x 56 yard long, weighing 182 lbs.

Resin

An ambient cure resin is perfect for point repairs. Our resin provides predictable pot life and cure times for optimum production. It mixes easily and is specially formulated for easy impregnation. Low odor, no shrinkage and exceeds all specifications. Available in 5 gallon pails or 55 gallon barrels.